Organizing all the essential Honda XR650R information!
Clutch and Throttle Cable Routing
When replacing cables or working on the bike in general the cables tend to get twisted up and routed where they don’t belong. Here are some diagrams showing the factory recommended cable routing for the throttle cables, clutch cables, decompression cables, and other wires.
| Print article | This entry was posted by Evan Fell on January 31, 2011 at 2:58 pm, and is filed under XR650R Helpful Diagrams, XR650R Notes. Follow any responses to this post through RSS 2.0. You can leave a response or trackback from your own site. |
about 4 months ago
Do cables need to be exstended to raise the bars ? Cables look to tight to do so on mine. Cheers
[Reply]
admin Reply:
February 17th, 2012 at 7:15 pm
You can raise them a couple inches without extending the cables. I rotated my throttle down a bit to create some extra slack.
[Reply]