Honda XR650R Motor Illustration – Cutaway View

I love illustrations like this. What a hansom motor!

This entry was posted by Evan Fell on March 10, 2010 at 4:38 am, and is filed under XR650R Helpful Diagrams. Follow any responses to this post through RSS 2.0. You can leave a response or trackback from your own site.

Related Posts
Comments (0)

No comments yet.

No trackbacks yet.

Honda XR650R Gearing Calculator – What Gearing to Use!

about 2 years ago - 2 comments

Selecting the proper final drive ratio for the XR650R is important for optimum performance and comfort on your selected terrain. The stock gearing is a 14 tooth on the front sprocket and a 48 tooth on the rear sprocket.
Many owners dual sporting their bike will run a 15 tooth front sprocket and will drop a More >

Destroyed XR650R Piston and Valves

about 2 years ago - 1 comment

The top end of the Honda XR650R is very robust and long living. However, if you push it too hard you can eventually hit a wall. The pictures below are from a motor that was running a stage 2 cam. This cam puts the valves VERY close to the piston when fully open. When the More >

Have a Noisy XR650R?

about 2 years ago - No comments

The XR650R is a fairly smooth running motor but is known to have a variety of rattles and ticks. If your motor seems to be making a little extra noise lately the cause could be one of the below:
notes from JM-2008
Worn Cam Chain
Historically larger XR,s (old 350’s/400/500/600/650) use a ‘Morse Hy-Vo’ type cam chain.
Looks like More >

Clutch Bushing Inspection

about 2 years ago - No comments

From time to time it’s a good idea to inspect your clutch bushing for wear. Wear can create slop in the clutch and over time significant damage to the basket. These parts aren’t known to wear at any accelerated rate, but next time you replace your clutch plates make a point to pull off the More >

Rekluse and Revloc Auto Clutches

about 2 years ago - No comments

Coming soon.

Magnetic Oil Drain Plugs

about 2 years ago - No comments

A couple manufacturers make a magnetized oil sump plug for the XR650R. The factory plug is not magnetized, however many competing bikes (such as the KTM) come stock with a magnetized plug. The magnetization picks up any small metallic debris from your bikes oil – and can be used as a great indicator of troubling More >

XR650R Factory Recommended Uncorking Procedure

about 2 years ago - No comments

Shortly after the Honda XR650R was released Honda published this short article for it’s dealer technicians. It outlines the parts needed for the ‘uncork’ and a brief synopsis of what’s involved. To get the complete parts list you can go to the uncorking procedure page here on this site.