Warning: Use of undefined constant ads_widget_register - assumed 'ads_widget_register' (this will throw an Error in a future version of PHP) in /home/evanidah/public_html/honda-xr650r.com/wp-content/plugins/quick-adsense/quick-adsense.php on line 429

Warning: Use of undefined constant WP_EMAIL_CAPTURE_PATH - assumed 'WP_EMAIL_CAPTURE_PATH' (this will throw an Error in a future version of PHP) in /home/evanidah/public_html/honda-xr650r.com/wp-content/plugins/wp-email-capture/wp-email-capture.php on line 23
Honda XR650R Parts, Service, and Repair | Diagrams

Posts tagged Diagrams

Honda XR650R Wiring Diagram (U-Type)


Here is a factory wiring diagram for the Honda XR650R. It is specifically from a 2000 model, but they were mostly the same. Please not that this is only a U-Type XR650R which was the street legal model available in Australia and select other parts of the globe.

Honda XR650R-U- Wiring Diagram

Oil Flow of the XR650R


The Honda XR650R is a dry sump motor just like all the other Honda XR’s. The majority of oil is stored in the oil tank above the motor. By having the oil tank high up it means that the oil pressure pump will always have a good stream of oil from which to pull. Oil is pulled (so to speak) by the pressure pump down through the oil strainer on the front of the frame. Oil is circulated through the top end of the motor, across the crank, and into the transmission. It is then sucked up out of the sump through a screen by the scavenging pump and pushed back up into the tank in the frame through the plumbing on the right side of the frame. It’s a very simple system which is reliable and simple to monitor.

Honda XR650R lubrication system and oil flow

Go to Top